Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING:
remote
sensing
temp/timer
auto /
hi []reed
to
filter
reset
V ON-OFF A FAN SPEED
"x_ PRESS A TO RAISE
I "PRESSV TO LOWER
sleep
YOU WILL SEE;
remote
sensing
temp/timer
F
m
auto /
hi [] fitter
reed
to reset
V ON-OFF A FAN SPEED sleep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
60 °F (16 °C) and 90 °F (32 °C). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO ADJUST FAN SPEEDS;
remote
sensing
temp/timer
auto j
hi [] filter
med
to reset
V ON-OFF A FAN SPEED sleep
\
DO THIS:
YOU WILL SEE:
remote
sensing
temp/timer
auto j
medhi filter
to [] reset
V 0N-0FF A FAN SPEED steep
PRESS TO SELECT
TO USE AUTO FAN FEATURE:
remote
sensing
temp/timer
auto /
medhi filter
Zo, reset
V 0N=0FF A FAN SPEED
DO THIS:
sleep
PRESSFAN BUTTON,
CHOOSE AUTO
YOU WILL SEE;
remote
sensing
temp/timer
F
m
auto m /
hi filter
med
So reset
V ON-OFF A FAN SPEED steep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed.
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.
Loading ...
Loading ...
Loading ...