Loading ...
Loading ...
Loading ...
13D-Link DCS-6500LH User Manual
Section 3 - mydlink
1 Device Name Tap to change the device’s name.
2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.
3 Motion Settings
Tap to further congure sensitivity and the active area of motion
detection.
4 Point to Go
This photo is what you will see when you control your viewpoint in the
camera's Point to Go live-view. Tap Rescan to scan a new panorama.
5 Auto Home
Enable to automatically return your camera to the set 'Home Point'
after 60 seconds of inactivity.
6 Storage
Tap to change the video clips storage location from the microSD card to the
cloud. You can also subscribe to mydlink Cloud from here and view your
current subscription plan.
7 Camera Microphone
Tap to enable or disable picking up sound near your camera in live view
and recordings.
8 Night Vision Tap to change night vision detection to On, O or Auto.
9 Anti-Flicker
Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency
of your lights.
10 Invert Image Enable this to invert the camera view.
11 Pan-Tilt Control
Choose whether to control your camera's Point to Go live-view pan-tilt
control by Swiping or Tapping
12 Status LED Disabling this will turn o the LED until you turn it back on.
13 Designated Contact
Tap here to add, remove, or edit designated contacts that appear in the
rich notication.
14 Wi-Fi
Tap to see the current wireless network. Note: Tap Remove Device
or press the reset button if you want to change wireless networks.
15 Time Zone Select the time zone to calibrate your device to.
16 Firmware
This displays the installed version of the rmware on your device. Tap to enter
the update settings. You can choose the most suitable time for automatic
updates.
17 MAC ID Identies the device for support issues.
18 Remove Device Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
9
10
11
13
14
12
18
1
15
16
17
Loading ...
Loading ...
Loading ...