Adastra SA-180 Sa180 Secure Wall Amplifier With Uhf Microphone

User Manual - Page 3

For SA-180.

PDF File Manual, 8 pages, Download pdf file

Loading ...
Loading ...
953.148UK User Manual
Front panel
Bottom panel
Connections
Connect the bottom panel IEC inlet (24) to the mains using the supplied mains lead
(or an equivalent approved type). Ensure that the mains voltage is correct (230Vac)
and the mains outlet is switched on. Mains and speaker output connections are fed
through the bottom of the cabinet and the wires can be bundled together and fed
through a securing plate (supplied) to deter tampering with the connections.
The SA180 has a total of 4 input channels. INPUT 1 and INPUT 2 are connected by either XLR or 6.3mm jack
to the combo connectors on the front panel (6). It is important to determine which type of input source is
connected and make the appropriate selection on the input type selector switch (5).
If the input is a standard microphone, slide the switch to “MIC”.
If the input is a condenser microphone which requires phantom power, slide the switch to “PHANTOM”.
If the input is a line level input (CD player, MP3 player, electronic keyboard etc.), slide the switch to “LINE”.
AUX 1 input is connected via a mini jack (3.5mm stereo) to accept a line input from smart phone, tablet or
laptop etc. If the input is stereo, the left and right sides will be mixed (summed) to mono. This input shares a
channel with the internal media player (see below) and is controlled by the AUX1/MEDIA volume control (14)
AUX 2 input is connected via a twin RCA connector to accept a line input. If the input is stereo, the left and
right sides will be mixed (summed) to mono. This input is independent of the media player and is controlled
by the AUX 2 volume control (15)
Further mixer-amplifiers or slave amplifiers can be connected from the LINE OUT RCA sockets (16).
This output carries the full mix of all channels, including the media player, as fed to the speakers.
1.
SD card slot
2.
Output level meter
3.
BASS EQ control
4.
Input 1 + 2 VOLUME controls
5.
Input 1 + 2 input type selector switches
6.
Input 1 + 2 combo XLR/jack input sockets
7.
AUX 1 mini jack input (3.5mm stereo)
8.
Media player display
9.
USB port
10.
UHF wireless microphone receiver antenna
11.
UHF wireless microphone volume control
12.
TREBLE EQ control
13.
MASTER volume control
14.
AUX 1 / MEDIA volume control
15.
AUX 2 volume control
16.
LINE OUT RCA connectors
17.
POWER on/off switch
18.
AUX 2 RCA input connectors
19.
Mains voltage switch
20.
IEC mains inlet & fuse holder
21.
DC power terminals
22.
COM speaker terminal
23.
4 - 16Ω speaker terminal
24.
100V speaker terminals
Loading ...
Loading ...
Loading ...