Loading ...
Loading ...
Loading ...
• The night light will turn on automatically when it detects human body motion in the
dark environment, and will turn off automatically after a while if no human body
motion is around.
• The night light function is enabled by default with its lighting up for 15 seconds in
2.5 lumens.
• You can enable or disable the night light function on the page of Mi Motion-Activated
Night Light 2 (Bluetooth) in the app. The brightness can be adjusted between 2.5 to
25 lumens and the lighting up time between 15 to 60 seconds.
Note:To do the settings or update the firmware in the app, enable the Bluetooth
function on your phone first, then move your body around within the induction range of
the night light or push the Bluetooth switch to either side.
• The night light has the sensor functions to not only detect the human body motion,
but also the ambient light status of bright or dark.
• You can access the night light to the devices that support Bluetooth gateway
function, such as the Mi Bedside Lamp and the Mi Smart LED Ceiling Light. Tap
Bluetooth gateway in the settings of the night light page in the app.
• After the night light is successfully accessed, then you can check the logs of the
human body motion and the ambient light status. You can also configure to interact
this night light with other devices in smart scenes.
How to Use
1. Night Light Function
2. Sensor Function
Loading ...
Loading ...
Loading ...