Loading ...
Loading ...
Loading ...
To Level The Freezer:
Whileunitislyingon itsback,notethe
locationofthe 4 leglevelersinstalbdat
each corner. These leg levelers will be
iiiiiiiiiiiiiiii!}ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiii!}ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiiiiii!}ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiiiiiiiii!}ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:_
iii
used to level the freezer and to adjust the
height. Use a carpenter's level to level the
freezer from front to back and side to side.
Adjust the plastic leveling feet in front, 1/2
bubble higher, so that the door closes
easily when left halfway open.
Plastic!
_eft to'_
Leveling'_Feet ii_ e
'i
O_ _
Leveling Instructions For
Matching Tall Refrigerator / Tall
Freezer Pair:
= Level door of first unit using all four
levelers and slide unit into place.
Recheck for levelness and adjust
if necessary.
• Measure distance from floor to
bottom of door on first unit. Adjust
and level second unit so door
height matches.
• Leg Level Adjustments:
One full turn of all 4 leg levelers will
raise door 5/32".
Slide second unit into place leaving a
Leveling Door with
Adjustable Hinge
Use the lower hinge adjustment to fine
tune the door height and for final cabinet
spacing. Use a 7/16" socket or wrench
to adjust the screw at the bottom of the
lower hinge.
Adjusting Doors For Matching Tall
Refrigerator / Tall Freezer Pair
The doors may also be adjusted side to
side with the slotted hinge for aligning
the doors parallel to each other. Loosen
the two bolts with a %" wrench and one
screw with a Phillips screwdriver. Shift
the doors until parallel, then retighten the
screws securely. (See illustration below.)
Lower Hinge Adjustment For
Leveling The Doors Of The
Matching Tall Refrigerator / Tall
Freezer Pair
To level the doors using the adjustable
lower hinge (some models):
1. If the refrigerator door is lower than
the freezer door, raise the refrigerator
door by turning the adjustment screw
clockwise using a 7/16" socket
wrench. (See illustration below.)
2. If the freezer door is lower than the
refrigerator door, raise the freezer
door by turning the adjustment screw
clockwise using a 7/16" socket
wrench. (See illustration below.)
S!otted Hinge ir_! _ I
Adjustmen! ui_r
ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!£i;!iii
Loading ...
Loading ...
Loading ...