Loading ...
Loading ...
Loading ...
Problem solving guide
58
Other problems
Problem Cause and remedy
There are humming
noises
The compressor is operating.
These noises are quite normal and do not indicate a
fault.
A programme does not
start
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is re-
stored any previously running programme will re-
start automatically.
After the DryCare40
Extra is selected, the
drying level “jumps”
back to a different level.
The drying level selected previously cannot be com-
bined with the Extra. The next possible drying level
is selected automatically.
Only the Start/Add
laundrysensor control
flashes slowly when the
programme is running.
Once the programme has been running for
10minutes, the indicators go out. The Start/Add
laundry sensor control flashes slowly. This is not a
fault, but a normal function to help save energy.
Touch a sensor control to switch on the indicators.
See “Control field standby status” in “Program-
mable functions”.
The tumble dryer is
switched off.
The tumble dryer switches off automatically after
15minutes if no further selections are made. This is
not a fault, but a normal function.
Select a programme.
Loading ...
Loading ...
Loading ...