Loading ...
Loading ...
Loading ...
Installation
Connecting the Water Supply
Materials Needed:
• Y4"outer diameter flexible copper tubing
• Shut-off valve (requires a Y2' hole to be drilled into
water supply line before valve attachmenO
• Adjustable wrench (2)
• Y4"hex nut driver
Notes:
.
Use copper tubing only for installation. Plastic is
less durable and can cause damage.
Add 8' to tubing length needed to reach water
supply for creation of service loop.
Create service loop with copper
tubing (minimum 2' diameter).
Avoid kinks in the copper tubing
when bending the service loop.
Do not use plastic tubing.
2' diameter
ITII n IITI U nl
2. Remove plastic cap from water valve
inlet port.
.
.
Place brass nut (A) and sleeve (B)
on copper tube end as illustrated.
Reminder: Do not use an old
sleeve. The nut and sleeve are
provided in the Use and Care
packet.
Place end of copper tubing into
water valve inlet port. Shape
tubing slightly. Do not kink - so
that tubing feeds straight into inlet
port.
Loading ...
Loading ...
Loading ...