Loading ...
Loading ...
Loading ...
16
VENTING OPTIONS
Attention should be given to ensure that any applicable regulations concerning the
discharge of exhaust air are fulfilled.
Ducted
It is recommended that 8" (203mm) diameter, rigid or semi-rigid ducting is used. This will
require a 8 1/4" (210mm) (min) round hole in the ceiling or wall. Care should be taken to
position the hole correctly.
For optimal efficiency use the shortest and straightest duct route possible and use rigidor
semi-rigid ducting for reduced noise and increased airflow. Flexible metal ducting should
only be used as a last resort (ie in difficult installations) and if used ensure that it is
straight, smooth and extended as much as possible.
Recirculating
To enable the product to operate with the air recirculating, purchase a recirculation diverter
and carbon filters (refer to the ‘Parts and accessories’ section). This recirculation diverter
is required to channel the air out the side vents at the top of the chimney and the carbon
filters are required to remove odors.
A ducting hole is not required in the wall or ceiling if the ventilation hood is installed to
operate with exhaust air recirculating.
Loading ...
Loading ...
Loading ...