Loading ...
Loading ...
Loading ...
1. Fastenthedryerdrainhoseto thewasherdrain/elbow
asshownin picture"A".Securewithplasticties
supplied.
,_ CAUTION
Do not over tighten plastic ties pinching or
causing a restriction in the drain hose.
2. Place drain hose assembly into standpipe as shown in
picture "B".
x
o Sink/Basin or Floor drain:
If using the elbow supplied on the hose re-position
elbow closer to the drain end of hose and fasten with
the plastic ties as shown in picture "C".
Secure hose and/or elbow as shown below. Sink "D"
or floor "E".
NOTICE: Examples shown are for reference only. Not all
fittings, connectors, nuts, brackets, ties, etc. are supplied
to accommodate every application.
Maximum height of drain is 39 in. (100 cm).
o Sink Drain Pipe:
Attach and secure drain hose as shown below in
picture "F".
Use a standard hose clamp which can be purchased
from your local hardware store.
NOTICES
o Examples shown are for reference only. Not all fittings,
connectors, nuts, brackets, ties, etc. are supplied to
accommodate every application.
o Ensure there are no kinks or crimps along the entire
lenght of hose.
o If installed in an upper floor of a multi-story building,
the dryer should be installed on a drained floor to
prevent water damage to lower floors in the event of a
leak.
13
Loading ...
Loading ...
Loading ...