Loading ...
Loading ...
Loading ...
11
11. Touch and hold Start/Pause
button to begin wash cycle
Touch and hold the Start/Pause button for 3 seconds to start
the wash cycle. When the cycle has finished, the end-of-cycle
signal will sound (if set). Promptly remove items when cycle
is done to avoid odor, reduce wrinkling, and avoid rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch the Start/Pause button to pause the washer; the lid will
unlock once the washer movement has stopped. This may
take several minutes if the load was spinning at a high speed.
Then close lid and touch and hold the Start/Pause button
again for 3 seconds to restart the cycle.
IMPORTANT: If the lid is left open for more than 10 minutes,
the water will pump out and the F8E6 error code will appear
on the display.
10. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off if desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
Loading ...
Loading ...
Loading ...