Loading ...
Loading ...
Loading ...
(347,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
1. Apply the parking brake.
2. Turn off unnecessary lights and acces-
sories.
3. Shift the select lever to the “P” or “N”
position (preferably the “P” position).
The starter motor will only operate
when the select lever is at the “P” or
“N” position.
4. Turn the ignition switch to the “ON”
position and check the operation of the
warning and indicator lights. Refer to
“Warning and indicator lights” �P172.
5. Turn the ignition switch to the “START”
position without depressing the accel-
erator pedal. Release the key immedi-
ately after the engine has started.
If the engine does not start, try the
following procedure.
(1) Turn the ignition switch to the
“LOCK”/“OFF” position and wait
for at least 10 seconds. After
checking that the parking brake is
firmly set, turn the ignition switch to
the “START” position while depres-
sing the accelerator pedal slightly
(approximately a quarter of the full
stroke). Release the accelerator
pedal as soon as the engine starts.
(2) If this fails to start the engine, turn
the ignition switch back to the
“LOCK”/“OFF” position and wait
for at least 10 seconds. Then fully
depress the accelerator pedal and
turn the ignition switch to the
“START” position. If the engine
starts, quickly release the accel-
erator pedal.
(3) If this fails to start the engine, turn
the ignition switch again to the
“LOCK”/“OFF” position. After wait-
ing for 10 seconds or longer, turn
the ignition switch to the “START”
position without depressing the
accelerator pedal.
(4) If the engine still does not start,
contact your nearest SUBARU
dealer for assistance.
6. Confirm that all warning and indicator
lights have turned off after the engine
has started. The fuel injection system
automatically lowers the idle speed as
the engine warms up.
While the engine is warming up, make sure
that the select lever is in the “P” or “N”
position and that the parking brake is
applied.
CAUTION
If you restart the engine while the
vehicle is moving, shift the select
lever into the “N” position. Do not
attempt to place the select lever of a
moving vehicle into the “P” position.
& Stopping the engine
S07BD02
The ignition switch should be turned off
only when the vehicle is stopped and the
engine is idling.
WARNING
Do not stop the engine when the
vehicle is moving. This will cause
loss of power to the power steering
and the brake booster, making steer-
ing and braking more difficult. It
could also result in accidental acti-
vation of the “LOCK”/“OFF” posi-
tion on the ignition switch, causing
the steering wheel to lock.
& Steering lock
S07BD07
After stopping the engine and the key is
removed from ignition switch, the steering
wheel will be locked due to the steering
lock function.
– CONTINUED –
Starting and stopping the engine (models without push-button start system)
345
7
Starting and operating
Loading ...
Loading ...
Loading ...