Loading ...
Loading ...
Loading ...
4
BEFORE USING FOR THE FIRST TIME
• Fill to the MAX marking.
• Boil the water then discard it.
• Rinse the kettle.
• Do this twice to remove any manufacturing dust, etc.
FILLING
1. Open the lid.
2. Fill with at least 1 cup of water, but not above max.
3. If you want only 1, 2, or 3 cups of water, ll to the 1, 2, or 3 marks inside the kettle.
4. Close the lid. Always close the lid when boiling the kettle.
USING YOUR KETTLE
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I.
5. The light will come on and the kettle will start to heat up.
6. When the water boils the kettle will switch o.
7. To switch o manually, move the switch to O, or simply lift the kettle o the stand.
GENERAL
Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused
by the steam used to switch your kettle o automatically.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it o. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle
to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Keep the connectors dry.
4. Push the hook on top of the lter down then lift the lter out of the kettle.
5. Rinse the lter under a running tap while brushing with a soft brush.
6. Lower the lter into the kettle, and engage the bottom hook in the bottom of the spout.
7. Press the top of the lter towards the kettle, to lock the hook in place.
8. Close the lid.
Loading ...
Loading ...
Loading ...