Loading ...
Loading ...
Loading ...
11
CLOSEMOUNT INSTRUCTIONS
1. Remove and discard the canopy cover (F) from the
bottom of the canopy (E).
Note: The downrod (A), canopy cover (F), and yoke
cover (G) are not used in this type of installation.
2. Remove three Phillips-head closemount screws (M)
from the top of the motor assembly (N). Align the
canopy (E) with the holes in the top of the motor
assembly (N), then re-install the Phillips-head
closemount screws (M) to secure the canopy (E) to
the top of the motor assembly (N).
3. Raise the fan and place the canopy (E) on the hook
on the mounting bracket (D), temporarily leaving
hands free for the wiring process.
E
F
N
M
E
1
3
2
E
D
Loading ...
Loading ...
Loading ...