Loading ...
Loading ...
4
IMPORTANT SAFEGUIDES
Before the refrigerator is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the refrigerator, follow basic precautions,
including the following:
•
Plu
g
into a
g
rounded 3-pron
g
outlet, do notremove
g
roundin
g
pron
g
, do not use an adapter, and do
not use an extension cord.
•
It is recommended that a separate circuit, servin
g only your refrigerator be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
• Never clean refri
gerator parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit
is disconnected.
•
Do not connect or disconnect the electric plu
g when your hands are wet.
•
Unplu
g the refrigerator or disconnect power before cleaning or servicing. Failure to do so can result
in electrical shock or death.
•
Do not attempt to repair or replace an
y part of your refrigerator unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
•
Use two or more people to move and install refri
gerator. Failure to do so can result in back or other
injury.
•
To ensure proper ventilation for
your refrigerator, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16
°
C) and below 90°F
(32°C). This unit must be installed in an area protected from the element, such as wind, rain, water
spray or drips.
• The refri
gerator should not be located next to ovens, grills or other sources of highheat.
•
The refri
gerator must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (220-240V AC only, 50 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
•
Do not kink or pinch the power suppl
y
cord of refri
g
erator.
• The fuse
(or circuit breaker) size should be 15 amperes.
• It is important for the refrigerator to be leveled in order to work properly. You may need to make
several adjustments to level it.
•
All installation must be in accordance with local plumbin
g
code requirements.
•
Make certain that the pipes are not pinched or kinked or dama
ged during installation.
• Check for leaks after connection.
•
Never allow children to operate, pla
y with or crawl inside the refrigerator.
•
Althou
g
h the unit has been tested at the factor
y
,duetolon
g
-term transit and stora
g
e, the first batch
of ice cubes must be discarded.
•
Do not use solvent-based cleanin
g agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
• Do not use this apparatus for anything other than its intended purpose.
Loading ...
Loading ...
Loading ...