Loading ...
Loading ...
Loading ...
IMPORTANTSAFE iNSTRUCTiONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Please read all safety instructions before using your new Electrolux range.
WARNIN@
To reduce the risk of fire, electrical shock, or injury when using your appliance,follow basic
precautions includingthe following:
[]
If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
FOR YOUR SAFETY:
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
m WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• immediately call your gas supplier from a neighbor's
phone. Followthe gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a
qualified installer, servicer or the gas supplier.
, All ranges can tip.
• injury to persons could
result.
. install anti-tip device
packed with range.
. See Installation instructions.
To reduce the riskoftipping of the range, the
range must be secured by properly installed
anti-tip bracket(s) provided with the range.
To check if the bracket (s) is installed
properly, remove the lower panel or storage
drawer and verify that the anti=tip bracket (s)
is engaged. Refer to the installation
instructions for proper anti-tip bracket(s).
Remove all tape and packaging wrap before using the appliance. Destroythe carton
and plastic bags after unpacking the appliance. Never allow children to play with
packaging material.
Proper Installation-Be sure your appliance is properly installed and grounded by
a qualified technician in accordance in United States 'with the National Fuel Gas
Code ANSI Z223.1 latest edition, and National Electrical Code ANSi/NFPA No. 70
latest edition, and local code requirements, and in Canada with Canadian
Standards CAN/CGA B149.1, and CAN/CGA B149.2 and Canadian Electrical Code,
CSA C22.t part 1, and local requirements, install only per installation instructions
provided in the literature package for this range.
Ask your dealer to recommend a qualified technician and an authorized repair service.
Know how to disconnect the electrical power to the range at the circuit breaker or fuse box
in case of an emergency.
. User ServicingmDo not repair or replace any part ofthe appliance unless specifically
recommended in the manuals, All other servicing should be done only by a qualified
technician to reduce the risk of personal injury and damage to the appliance.
° Never modify or alter the construction of a range by removing leveling legs, panels,
wire covers, anti-tip brackets/screws, or any other part of the product.
Loading ...
Loading ...
Loading ...