User Manual Frigidaire PLHS39EESS6 Side-by-Side Refrigerator

In general, you should change your water filter every six months to ensure the highest possible water quality.

On most models, the Water Filter Status on your display will illuminate and prompt you when it’s time to replace the filter. If your refrigerator has not been used for a period of time (during moving for example), it is recommended to change the filter before reinstalling the refrigerator.

To order replacement filters, simply go to our Filter & Parts page. Remember to order the same filter type that is currently in your refrigerator.

If your refrigerator is not dispensing water, simply check the following:

If your refrigerator display has been locked, it will not dispense water or ice. Press and hold the lock key on your display for 3 seconds to unlock.
Make sure the water filter is positioned properly – simply remove and re-install the water filter to double check.
The water filter may be clogged or overdue for replacement. If water is dispensing slowly or not at all, or your water filter is older than 6 months – it’s time to replace.
If you have any questions, please contact us.

Setting the humidity control on your crisper drawers is not hard but we often forget what the best setting is based on the food type. Here are some helpful tips:

Leafy vegetables keep best when stored with the humidity control set on HIGH, or in a drawer without a humidity control. This keeps incoming air to a minimum and maintains maximum moisture.
Non-leafy vegetables and fruits still in their skin should be stored with the humidity control set on LOW. It’s best to wash items and remove any excess water before placing in the crisper drawers.
Items with strong odors or high moisture content should be wrapped before storing.
If you have a refrigerator model with the Auto CrispSealTM Drawer, they are equipped with an auto humidity control on the side of each crisper under the humidity control cover. Good news – no settings needed!