Loading ...
Loading ...
Loading ...
Before Drying...
Energy Saving Tips
• Make sure the lint filter is always
clean.
• Do not overload the dryer.
• Do not overdry, items.
• Remove items to be ironed while
still damp.
• Large loads of similar fabrics dry
the most efficiently. However,
dry permanent press in smaller
loads to prevent wrinkling.
• Use the correct cycle for the type
of fabric being: dried.
• Locate your dryer so the exhaust
duct is as short and straight as
possible.
• Do not open the door during the
drying cycle.
• Plan to do your laundry on low
humidity days:; your clothes will
dry faster.
Dry multiple loads of clothes one
right after another so dryer
interior does not have to be
reheated for each load.
Helps and Hints
WARNING
To reduce the risk of fire,
explosion, serious injury or
death, clothes which have
traces of any flammable
substances such as cooking
oil, machine oil, flammable
chemicals, thinner, etc.
must not be put into the
dryer.
W131
The necessary suggestions and
directions for installation and
proper exhausting are given in
the INSTALLATION
INSTRUCTIONS which are
included with the dryer.
Static electricity may cause
garments of synthetic fibers (as in
lingerie) to cling together,
especially if they are overdried.
The use of a liquid fabric softener
in the rinse water of the washer,
or a fabric softener sheet in the
dryer, will soften clothes and
reduce static electricity.
Do not wash or dry clothes that
shed lint. ill the same load with
permanent press or knit garments.
Remove permanent press loads
immediately after dryer stops.
Follow the CARE LABELS on
FLAME RETARDANT,
SCOTCH-GUARD TM, ,etc.,
garments tor the proper washing
and drying.
If loads should be damp for
ironing, turn timer knob to the
ENERGY SAVER setting,
marked with a dot (.), in
Automatic or Time Dry cycles.
6 503728
Loading ...
Loading ...
Loading ...