Loading ...
Loading ...
Loading ...
4
PARTS
1. Filter
2. Lid
3. Lid lock
4. Handle
5. Suppressor
6. Stand
FILLING
1. Lift the lid lock to open the lid.
2. Fill with at least 2 cups of water, but not above max.
3. Close the lid, and press down to lock it.
PREPARATION
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Press and release the 2 button.
5. The display will show the temperature of the water in the kettle.
6. The 2 button will ash.
BOILING WATER 100ºC
1. Press the u button.
2. 100 will ash on the display.
3. Press the 2 button.
4. The 2 button will stop ashing and light up.
5. The display will show the temperature of the water in the kettle.
6. When it reaches the set temperature, the light in the button will go o.
7. To switch o manually, press 2.
HEATING WATER TO A SELECTED TEMPERATURE
The temperatures available are: 100 (boil), 95, 90, 85, 80, 75, 70, 65, and 60 (°C). Use the
°F °C button to swap between Fahrenheit and Centigrade on the display.
1. Use the u and d buttons to set the temperature.
2. Press the 2 button.
3. The display will show the temperature of the water in the kettle.
4. When it reaches the set temperature, the light in the button will go out.
5. To switch o manually, press 2.
If you set the wrong temperature, and you want to use the kettle again without
pouring, and before it goes to sleep: Press the 2 button twice.
Loading ...
Loading ...
Loading ...