Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center.
PROBLEM CAUSE CORRECTION
Loss of drive 1 Freewheel control in 1
"DISENGAGED" position.
2 Debris on steering plate (if 2
equipped).
3 Motion drive belt worn, damaged, 3
or broken.
Place freewheel control in
"ENGAGED" position.
See "CLEANING" in the
maintenance section.
Replace motion drive belt.
4 Air trapped in transmission during 4 Purge transmission.
shipment or servicing.
5 Axle key missing. 5 Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Engine "backfires"
when turning
engine "OFF"
1 Engine throttle control not set 1 Move throttlecontrol between
between half and full speed (fast) half and full speed (fast) position
position before stopping engine, before stopping engine.
Engine dies when 1 Reverseo,peration system (ROS) 1
tractor is shifted is not ON" while mower or other
into reverse attachment is engaged.
Turn ignition key to ROS "ON"
position. See Operation section.
31
Loading ...
Loading ...
Loading ...