Loading ...
Loading ...
Loading ...
Use and Care Instructions English | 5 |
Introduction
General Information
Before using your appliance, be sure to read this manual.
Pay special attention to the Important Safety Instructions
located at the beginning of the manual.
This manual provides the proper care and use instructions
for two styles of THERMADOR PROFESSIONAL
®
PH
Series wall hoods:
PHxxGS — 27'' (686 mm) in depth, with widths of 36''
(914 mm), 42'' (1067 mm), 48'' (1219 mm), 54''
(1372 mm), and 60'' (1,524 mm). This model series
features brushed stainless-steel canopy with halogen
lamps and heat lamps.
PHxxHS — 24'' (610 mm) in depth, with widths of 30''
(762 mm), 36'' (914 mm), and 48'' (1219 mm). This
model series features brushed stainless-steel canopy
with halogen lamps.
All hoods require the choice of a Remote, Inline, or Integral
Blower. Use only THERMADOR
®
blowers with
THERMADOR ventilation hoods. All blower models are
sold separately. See the Ventilation Planning Guide for
recommended blowers. Contact Customer Service for
additional options.
All Hood models are rated for 120 VAC, using a 15 amp or
20 amp circuit breaker; see the Installation Manual for more
details.
When connected to a GFCI-protected supply, the Pro
Hoods are suitable for use in damp locations that are
protected from outside weather conditions and not subject
to saturation with water and other liquids, but can be
subject to moderate degrees of moisture. Refer to local
codes, NEC/CEC, and/or the Authority Having Jurisdiction
(AHJ) for additional information.
Figure 1: PHxxGS
Figure 2: PHxxHS
WARNING
To avoid risk of burn, turn the hood ON when cooking at
high heat or when flambéing food.
DO NOT use all heating elements or gas burners
simultaneously at high settings for a prolonged period.
(max.15 minutes).
If the hood is located over a gas cooktop, operate the
hood at maximum setting whenever three or more gas
burners are being used.
DO NOT operate the ventilation system during a cooktop
fire.
Loading ...
Loading ...
Loading ...