Loading ...
Loading ...
Loading ...
Setting Surface Controls
Sizes of the Surface Gas
Burners
Your appliance is supplied with the
following 3 different surface gas
burners:
Simmer Burner (5,000 BTU)
1 (or 2 on 36" modeUs)Standard
Burners (9,500 BTU)
o1 Power Burners (12,000 BTU)
oPower Burner (16,000 BTU)
Burner Cap
Extra Large
"POWER"
Burner Head
(12,000 BTU)
When setting up the range for
the first time, make sure that the
correct Burner Heads, Burner
Caps and Burner Grates are
located as shown in Figure 1,
Left Front
Gas Opening
Burner Cap
_Gas
Burner Head Burner Head
Center
Gas Opening
Extra Large
Burner Cap _-_
"POWER"
Burner Head
(16,000 BTU)
Right Front
Gas Opening
36" Models
only
Burner Cap
(Standard)
36" Models only
Small
P-_ Burner Cap
@ _---- "SIMMER"
Burner Head
(5,000 BTB)
Right Rear
Gas Opening
Figure 1
Burner
located properly in slot
of each Burner Head
Figure 2
Assembly of the Surface Burner Heads, Burner Caps,
Burner Grates and F_ue Covers
Utis very important to make sure that aHof the Surface Burner Heads,
Surface Burner Caps and Surface Burner Grates are installed correctUy
and at the correct Uocations,
1, PUaceaH4 (four) or 5 (five) Burner Heads in the correct Uocations
(See Figure 1), Make sure that the correct Burner Head is pUaced
with the corresponding Gas opening and that the EUectrode is
Uocatedproperly in the suetof each Burner Head (See Figure 2),
Proper Burner Head placement insures that each Burner will have
the correct spark required for surface gas ignition,
2, Place the correct Burner Caps at each of the burner locations
(Burner Cap Pilot Hole must face up), Each of the 4 (four) Burner
Heads MUST have a Burner Cap installed to insure proper ignition
and gas flame size and must be in place with the Pilot Hole facing
up BEFORE placing the Burner Grates (See Figure 2),
3, Place the 2 (two) or 3 (three) cast iron Burner Grates supplied with
the range, Carefully lift the burners grates on to the cooktop over
the burners, Properly installed Burner Grates will rest with all Grate
legs on the cooktop,
REMEMBER -- DO NOT ALLOW SPILLS, FOOD, CLEANING
AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS
OPENING. Always keep the Burner Caps and Burner Heads in place
whenever the surface burners are in use,
Loading ...
Loading ...
Loading ...