Loading ...
Loading ...
Loading ...
Installation
Wiring
Ensure the audio system is turned off before making any connections.
Connect the power wires to the terminal
Pay attention to respect cable polarity
All wires/connection must be insulated with electrical tape and fitted with protective connector shields where
ver possible
Separate Audio and Power wiring to avoid interference.
Connect the signal input according to the selected input (see the picture below)
Level Control
We recommend the following method:
Turn “Frequency Cutting” and Level Input” levels to middle level.
Adjust the level control until the desired maximum volume is achieved without distortion.
Adjust the frequency cutting and the level input sensitivity. Place all the knobs in the center position, and adjust the frequency
cutting to optimize vehicle acoustics. .
Fuse
Turn off the subwoofer and disconnect all connections before replacing blown fuse.
Only use 15A fuse.
Product Care
Please remember that your Furrion product is an electronic device, and needs to be treated with care:
Do not subject it to mechanical shock or vibrations.
Do not subject it to excessive heat.
Keep it away from water and excessively humid areas.
Keep it away from high electromagnetic fields.
There are no user-serviceable parts inside. Opening the product or
trying
to repair it will terminate the warranty.
Loading ...
Loading ...
Loading ...