Loading ...
Loading ...
Loading ...
INSTALLATION- BUILT-IN
NOTE: Due to the many different materials used to build walls, it is highly
you consult your local builder before you install this appliance on a wall.
Preparation
1.
Select a location that is not prone to moisture and is located at least 0.91m or 3 feet away
from combustible materials such as curtains, drapes, fur
2.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
place.
3.
Prepare a wall with a framed opening to accommodate the size of your unit. Leave at least
1/4” (6mm) around the edge of the appl
with local and national codes and other applicable regulations.
Prior to installing, test the appliance to make sure the appliance is fully operational by
plugging the power supply cord into a 120 Volt groun
INSTALLATION
1. Unscrew 4 screws and t
ake off the trim. (NOTE: Keep hold of the front glass as it may fall
down automatically when the trim is removed.)
14
NOTE: Due to the many different materials used to build walls, it is highly
recommended that
you consult your local builder before you install t
his appliance on a wall.
Select a location that is not prone to moisture and is located at least 0.91m or 3 feet away
from combustible materials such as curtains, drapes, fur
niture, bedding, paper, etc.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
Prepare a wall with a framed opening to accommodate the size of your unit. Leave at least
1/4” (6mm) around the edge of the appl
iance. Any new wiring must be done in compliance
with local and national codes and other applicable
regulations.
Prior to installing, test the appliance to make sure the appliance is fully operational by
plugging the power supply cord into a 240 Volt grou
nded outlet.
ake off the trim. (NOTE: Keep hold of the front glass as it may fall
down automatically when the trim is removed.)
recommended that
Select a location that is not prone to moisture and is located at least 0.91m or 3 feet away
niture, bedding, paper, etc.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
Prepare a wall with a framed opening to accommodate the size of your unit. Leave at least
iance. Any new wiring must be done in compliance
Prior to installing, test the appliance to make sure the appliance is fully operational by
ake off the trim. (NOTE: Keep hold of the front gla
ss as it may fall
Screws locations
Magnetic stones locations
The rough wall opening size of the fireplace:
W(“)
D(“)
TRD-26 26 1/4
TRD-30 30 3/8
TRD-33 32 3/4
TRD-38 38 1/8
TRD-44 44 1/4 1
5 3/8
TRD-48 48 1/4 1
5 3/8
The rough wall opening size of the fireplace:
D(“)
H(“)
13 17 1/4
13 19 5/8
13 22 1/8
14 27 3/4
5 3/8
32 1/8
5 3/8
42 1/8
Loading ...
Loading ...
Loading ...