Loading ...
Loading ...
Loading ...
20
USA
Santze Functon
Sanitize function raises the water
temperature in the final rinse to meet the
requirements of NSF/ANSI STANDARD
184 for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments.
C
At the end of a succesfull
sanitization “S“ is displayed on
the display. “S” is not displayed
on the display if the cycle is
interrupted or the water could
not be heated to the required
temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of 6 for
soil removal and sanitization
efficacy.
There is no intention, either
directly or indirectly, that all
cycles have passed sanitization
performance tests.
Half Load functon
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as you
like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key. The Half Load
indicator will light on the display in the
Function Selected indicator.
4. Close the door of the machine to start
the programme.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
6.4 AUXILIARY FUNCTIONS
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may cause
changes in the programme
duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the programme
will not be active.
SteamGloss Functon
It provides superior drying performance.
IonGuard Functon
Press IonGuard function button on
the panel to activate the IonGuard
function. While the function is active, the
system is activated intermittently and
prevents formation of bad odors due to
putrefication. If this function is selected, it
will be activated while the product is turned
off and the IonGuard indicator on the panel
will flash, a ventilation noise can be heard,
this is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
Loading ...
Loading ...
Loading ...