Craftsman 917272030 lawn tractor

User Manual - Page 32

For 917272030.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM CAUSE
Mower blades will
not rotate
Poor grass dis-
charge
Headlight(s) not
working (if so
equipped)
Battery will not
charge
Engine =backfires"
when turning
engine =OFP
Obstruction in clutch
mechanism.
Worn/damaged mower
drive belt.
Frozen idler pulley.
I Frozen blade mandrel
Engine speed too slow.
Travel speed too fast.
Wet grass.
Mower deck not level.
Low/uneven tire air pres-
sure.
Worn, bent or loose blade.
Buildup of grass, leaves
and trash under mower,
Mower drive belt worn.
Blades improperly
installed.
Improper blades used.
Clogged mower deck vent
holes from buildup of
grass, leaves, and trash
around mandrels.
Switch is =OFP.
Bulb(s) bumed out.
Faulty light switch.
Loose or damaged wiring.
Blown fuse.
Bad battery cell(s).
Poor cable connections.
Faulty regulator (if so
equipped).
Faulty altemator.
i " Engine throttle controlnot
set at "SLOW_
position for 30 seconds
before stoppingengine.
CORRECTION
Remove ebstruction.
Replace mower drive belt.
Replace idler pulley.
Replace blade mandrel
Place throttlecontrol in
=FAST" position.
Shiftto slower speed.
Allow grass to dry before
mowing.
Level mower deck.
Check tires for proper air
pressure.
Replace/sharpen blade.
Tighten blade bolt.
Clean underside of mower
housing.
Replace mower drive belt.
Reinstall blades sharp edge
down.
Replace with blades listed in
this manual.
Clean around mandrels to
open vent holes.
Turn switch =ON'.
Replace bulb(s).
Check/replace light switch.
Check wiring and connec-
tions.
Replace fuse.
Replace battery.
Check/clean all connections.
Replace regulator.
Replace alternator.
Move throttle controlto
=SLOW"position and allow
to idle for30 seconds before
stoppingengine.
32
Loading ...
Loading ...
Loading ...