Loading ...
Loading ...
Loading ...
20
USA
4. Close the door of your machine after
setting the Delayed Start. Once
the delay time is over, the selected
programme will start automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
To cancel the Time Delay function
Open the door of the product Press and
hold the Programme Selection / Programme
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
Time Delay function cannot be
set after the programme starts.
6.6 STARTING THE
PROGRAMME
Close the door of your machine to start it
after selecting the programme and auxiliary
functions.
C
MODEL DEPENDING:
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the dishes.
C
Pay attention not to open the
door of the machine when it is
running. There may be a rush of
vapour when you open the door
of your machine; be careful.
C
The machine will be switched
off if no button is pressed
within 5 seconds after opening
the door while the machine is
running.
C
After the door has been opened,
if any button is pressed within
5 seconds and the door is
closed, the selected programme
resumes; otherwise, the
machine will be switched off.
Open the door after the
machine has been switched
off, press On/Off button and
close the door within 5 seconds.
The programme will resume
washing.
C
The machine will remain silent
in pause mode for some time
in order to remove the water
from the machine and on the
dishes completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.
Loading ...
Loading ...
Loading ...