Loading ...
Loading ...
Loading ...
What How Basic Settings Additional Options
Temp Spin Soil Steam Clean Extra Rinse PreSoak Load
& Go
Towels Normal
Hot
Very Warm
Warm
Cool
Cold
Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓✓✓
Quick
Hot
Very Warm
Warm
Cool
Cold
Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓✓✓
Wrinkle Control
Hot
Very Warm
Warm
Cool
Cold
Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓✓✓
Heavy Duty
Hot
Very Warm
Warm
Cool
Cold
Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓✓✓
Cold Wash
Hot
Very Warm
Warm
Cool
Cold
Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓✓
Sanitize*
(with Oxi – on
some models)
Hot Fast
Medium Fast
Medium
Slow
Off
Light
Normal
Heavy
✓✓ ✓
CHOOSING THE RIGHT DETERGENT
Use only High Efciency detergents. The package will be marked
“HE” or “High Efciency.” Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent
will likely result in longer cycle times and reduced rinsing
performance. It may also result in component malfunction and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efciency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds.
If you use one of these and see a “SUD” error code appear in
the display, consider using a different HE detergent. Always
follow the detergent manufacturer’s instructions to determine
the amount of detergent to use.
Use only High Efciency (HE) detergent.
About Detergent Concentration
Today’s liquid HE detergents are concentrated. Most brands of
concentrated HE detergent will show the level of concentration
on the bottle.
However, if the detergent bottle does not give the concentration,
it can be easily calculated. Just divide the package size in uid
ounces by the number of loads. Then refer to the chart below
to nd the concentration.
If you do not get your desired cleaning results, try using a lower
concentration number. If you have excess suds, try using a
higher concentration number.
If detergent concentration is not 2x, change the detergent
concentration setting by touching and holding TEMP and SOIL
for 3 seconds.
Concentration Number of ounces ÷ number of loads
2X 1.5–2.49 (44.4 mL–73.6 mL)
3X 0.9–1.49 (26.6 mL–44.1 mL)
4X 0.7–0.89 (20.7 mL–26.3 mL)
5X 0.5–0.69 (14.8 mL–20.4 mL)
6X 0.3–0.49 (8.9 mL–14.5 mL)
* This cycle eliminates 99.9% of the most common bacteria found in clothes, sheets, and towels. Using the highest wash temperature available and
adding a powdered Oxi product in the drum (on some models) ensures sanitization. Check recommended wash temperature of your items and use the
amount of Oxi recommended by the manufacturer (on some models). Bacteria tested were K. pneumonia, P. aureginosa, and S. aureus.
Loading ...
Loading ...
Loading ...