Loading ...
Loading ...
Loading ...
Pullout Freezer Drawer
(select modds)
To [nstall:
1, Pull both rails out to
full extension.
2. While supporting
door front, hook
supports into slots
located on inside of
each slide.
, All four drawer bracket supports must be in the
proper slots for the drawer to function properly.
To Remove:
1. Pu[[ drawer open to fuji extension.
2. Tilt the lower basket forward and lift to remove.
3. On each white drawer
bracket is a basket cradle
with two snap attachments.
To release each cradle,
unlatch the snaps by
pushing them inward, away
from the side bracket. Lift
the cradles off of the rails.
4, Remove Phillips screw
from each of the drawer
slides (select models[},
5, Lift top of drawer front to
unhook the drawer from
the slides, Lift door front
out to remove,
.
4.
.
Lower door front into final position.
Replace and tighten Phillips screws that were
removed from the drawer slides (select models),
Place the basket cradles back onto the drawer
slides. Align basket cradle snaps with the slots on
the drawer brackets and press each cradle
towards the bracket until it clicks.
Basket cradle
6, Tilt the lower basket front down and set it down
into the basket cradles.
Loading ...
Loading ...
Loading ...