Loading ...
Loading ...
Loading ...
8
CONTENTS OF PACKAGE
A. Planer
B. Dust Hood & Chute
C. Star T25 Screwdriver
D. Dust Hood Knobs
E. Dust Hose Adapter 4” to 2-1/2”
F.
ON/O Switch Safety Key Lock
G. Hex Wrench & Handle Screw
H. Height Adjustment Handwheel
I.
Manual & Warranty Card (not shown)
LIST OF LOOSE PARTS
INSTALLATION
B
D
G
H
E
C
F
A
MOVING & INSTALLING THE PLANER
When moving the planer, only
use the carry handles that are located on the
side of the planer. DO NOT carry or move it using
the infeed and outfeed extensions, dust chute or
handwheel.
1. The machine should be firmly bolted to a stand,
workbench to avoid any movement of the machine
during use. The planer’s base has holes in each of
the four corners for this purpose (hardware is not
included).
For portability and secure clamping of the planer
to a workbench, the planer can be first permanently
bolted to a piece of plywood. Then the planer can be
positioned on your workbench, or other solid surface,
and the plywood can be clamped in place to secure
the planer for use. After use, the plywood can be
unclamped and the planer stored away for future use.
2. When positioning the machine on a solid, level
bench that is located in an area that ample space
in front and in back of the planer for the moving of
lumber to be milled. Align the machine so that during
use, any kickback will not face aisles, doorways, or
other work areas that bystanders may be in. Do not
locate or use the machine in damp or wet conditions.
THE MACHINE MUST NOT BE PLUGGED IN AND THE POWER SWITCH
MUST BE IN THE 'OFF' POSITION UNTIL ASSEMBLY IS COMPLETE.
NOTE: The 25-135H Planer requires minimal
assembly, and therefore the machine can be mounted
to a stand, workbench, or on a piece of plywood for
portability and storage before assembling of the parts
begins.
TOOLS REQUIRED FOR ASSEMBLY
Straightedge or level
To check and adjust the
extension tables level to
the planer table.
Loading ...
Loading ...
Loading ...