User Manual GE - General Electric UXB636BPTS Black Stainless 36" Trim for Downdraft Vent

Documents for GE - General Electric UXB636BPTS

The following documents are available:
User Manual Photos
UXB636BPTS photo
Installation
Instructions
WARNING
Use in unapproved appliance
may result in risk of fire or electric shock. This
Downdraft Vent System Black Stainless Trim
Kit should be used only with GE Appliances
Downdraft Vent System UVD6301 and UVD6361
series.
BEFORE YOU BEGIN
Read these instructions carefully and completely.
IMPORTANT Save these instructions
for local inspector’s use.
IMPORTANT Observe all governing
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the consumer.
Note to Consumer – Keep these instructions for
future reference.
Skill Level – Installation of this Downdraft Vent
System Black Stainless Trim Kit requires basic
mechanical skills. Proper installation is the
responsibility of the installer. Product failure due to
improper installation in not covered under the GE
Appliances Warranty.
WARNING
Improper grounding can result
in a risk of electric shock. The appliance must be
grounded. The plug must be plugged into an outlet
that is properly installed and grounded. Consult a
qualified electrician if the grounding instructions are
not completely understood, or if doubt exists as to
whether the appliance is properly grounded. Do not
use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet
near the appliance.
Downdraft Vent System
Black Stainless Trim Kit
UXB630BPTS and UXB636BPTS
TOOL NEEDED
PARTS INCLUDED
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This appliance is equipped with
a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
READ AND SAVE THESE INSTRUCTIONS
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
31-2000740 Rev. 0 03-20 GEA
Flat blade and
Phillips head screwdrivers
PART QUANTITY
Black Stainless Trim 1
Installation Instructions 1
Loading ...