Loading ...
Loading ...
Loading ...
Manual operation can be used temporarily in case the remote controller is dis able or
the unit requires mainten ance.
OPERATING INSTRUCTIONS
Manual operation
NOTE: This manual does not include Remote Controller Operations, se e the
<<Remote Controller Instruction>> packed with the unit for details.
Operating temperature
Manual control
button
A UTO/ CO OL
Suspension bars
AUTO/COOL
（ ）1
（ ）2
Manual control
button
Mode
Temper ature
Room temperature
Outdoor tempera ture
1. Optimum performance will be achieved within these operatin g temper atures.If air
conditioner is used outside of the above conditions, certain safety protection features
might co me into o peration and cause the unit to func tion abnormally.
2.Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please sets the vertical
air flow louver to it s maximum angle (vertically to the floor), an d set HIGH fan mode.
Suggestion: For the unit ad opts an E lectric Heater, w hen the outside ambient t emperature
is below 0 C(32 F), we strongly recommend you to keep the machine plugged in order to
guarantee it running smoothly.
O O
NOTE:
Cooling operation
Heating operation Drying op eration
17 62
-15 50 5 122
For the models with low
temperature cooling syste m
0 50
32 122
30 86
-15 30
5 86
10 50
0 50
32 122
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
For 24K Btu model, please use suspension
bars to prop up t he p anel.
Close the panel firmly to its original
position.
One press of the manual control button will
lead to the forced AUTO operation. If press
the button twice within five seconds, the unit
will operate under forced COOL operation.
This button is used for testing purposes
only. You had better not choose it.
To restore t he remote controller operation,
use the remote controller directly.
CAUTION:
1
3
2
●
●
NOTE: T he unit must be turned off before
operating the ma nual control button. If the
unit is operation al, contin ue pressing the
manual control b utton until the unit is off.
Loading ...
Loading ...
Loading ...