Loading ...
Loading ...
Loading ...
KNOW YOUR SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with
the location of the various controls and adjustments. Save this manual for future
reference.
AdjusChmaintTool Front HatedGuard.--=` ,_/ Front HandI_arter Rope
Cha,n Mud,or ;r , er
Bar Oil Fill Cap Housing Fuel Mix Fill Cap
Throttle Chain
Lockout Adjusting Direction
Screw of Travel
Rear
Handle
t
Throttle
Trigger Choke/ Chain Chain Nuts
Fast Idle Brake Catcher
Lever
ON/STOP SWITCH
The ON/STOP SW_TCHis used to stop
the engine.
THROTTLE TRIGGER
The THRO]qLE TRIGGER controls engine
speed.
THROTTLE LOCKOUT
The THROTiLE LOCKOUT must be
pressed before you can squeeze the
throttle l_gger. This feature prevents you
from accidentally squeezing the tdgger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pull-
ing the CHOKE/FAST iDLE LEVER out to
the full extent for cold stadthg or after
refueling. The choke provides additional
fuet to the engine during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the
carburetor to provide quicker starting,
Bar Sprocket
Hole
CHAIN BRAKE
The CHAIN BRAKE iS a device designed
to stop the chain if kickback occurs.
The chain brake activates automatically
in the event of kickback. The chain
brake ac_vates manuatty if the front
hand guard is pushed forward. The
chain brake is disengaged by pulling the
front hand guard back toward the front
handle as far as possiMe.
CHAIN TENSION
It is normal for a new chain to stretch
dudng first 30 minutes of operation, You
should check your chain tension fre-
quently. See CHAIN TENSION under the
SERVICEAND ADJUSTMENTS section,
_WARN|NG: Muffler is very hot
during and after use. Do not touch the
muffler or allow combustible material
such as dry grass or fuel to do so.
7
Loading ...
Loading ...
Loading ...