Loading ...
151 Connect the nine pin plug removed in step 8 to the
connector board on the adapter harness.
16. Dress the adapter harness along side of the present
washer harness as shown.
21. Using the plastic harness ties, attach the adapter
harness to the washer harness. Dress the harness in
such a manner that it will not interfere with any
moving parts or cause any noise when the washer is
in operation.
17. Connect the green connector plug from the adapter
harness to the pump.
18. Connect the green connector plug from the washer
harness to the connector on the adapter harness.
19. Matching color per color, connect the door switch
wires from the washer harness to the connectors in
the adapter harness.
20. Connect the adapter harness to the new door
lock/switch and install the switch in the washer
cabinet using the screws removed in step 6.
22. Connect the washer to the electrical power source
and test for proper operation. Close the door, place
the timer to the final spin position, and start the
timer. When the machine starts its fast ramp up to
the higher spin speed, turn the timer off, then
quickly pull on the door end verify the door is
locked, lfthe door opens, recheck the connections in
steps 9 through 12.
23. Using the tube of adhesive, glue the be!lows to the
front panel at the 2, 3, & 4 o'clock positions.
24. Install the front service panel.
_0 8/99