Loading ...
If the appliance you have purchased is not fitted with a mains power lead a power lead resistant
to a temperature of at least 90℃ must be used.
Otherwise, the electrical safety lf the appliance may be put at risk.
The manufacturer declines all responsibility for damage to persons or things caused by non-
observance of the above prescriptions or by interference with any part of the appliance.
WARMING
Close the cable clamp after making the
electrical connection. Close the
terminal board cover by twisting it down.
1-worktop
50mm
564
494
2
1
3
4
5
2-screw
3-bracket
4-hob
5-hob seal
≥750mm
5
8
0
m
m
5
64
m
m
4
94
m
m
5
m
10
m
68mm
V
entilation
slot
>
30mm
Recommended installation
Wood block
Scraper for cleaning the hob
WARNING : The appliance and its accessible parts become hot during use.
Care should be taken to avoid touching heating elements.
Children less than 8 years of age shall be kept away unless continuously supervised.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
maintenance shall not be made by children without supervision.
WARNING : Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g.
WARNING : Danger of fire: do not store items on the cooking surfaces.
WARNING : If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
WARNING : A steam cleaner is not to be used.
separate remote-control system.
the hazards involved. Children shall not play with the appliance. Cleaning and user
with a lid or a fire blanket.
WARNING : the appliance is not intended to be operated by means of an external timer or
Cleaning
Turn off the mains to the equipment before carrying out any maintenance and wait for it cool down. We
advise using lukewarm water and detergents to clean enameled elements.Never use abrasive products.
Rinse the glass worktop with water and dry using a soft cloth. Use
sponges or a moist cloth to clean the tops, and remember that water in excess can damage the electric
elements. Clean tough stains using non abrasive detergents, or warm vinegar.
Clean the electric tops using a moist cloth, then lightly oil the the top when it is still warm.
Only licensed repairers should service the appliance.
Installation
Electrical connectionAppliances with three-pole cable are set up for operation with alternating current at the
voltage and frequency indicated on the rating plate Look at the connection wiring diagram. The earth
conductor is yellow/green. The connection to the electricity supply must be made by a qualified person and
following the regulations in force. When the
appliance is to be installed above a built-in oven, the two appliances must be connected separately. The
supply cable must be so positioned that no point can reach a temperature 50° C
higher than ambient temperature. Also check that the supply system has an effective earth connection and
corresponds to the standards in force and that the breaker can be reached easily when the appliance is
installed.
Fitting guidelines
The voltage rating of the hob heating elements is 220-240V .Appliance with three-pole cable
are set upfor operation current at the voltage and frequency indicated on the rating plate
Look at the connection wiring diagram.The earth conductor is yellow/green. The connection
to the electricity supply must be made be made by a qualified person and followingthe
regulations in force. When the appliance is to be installed above a built-in oven,the two
apliances must be connected separately, to make it easier to take the appliances out and for
electrical safety.
The manufacturer refuses all responsibility if the standards in force are not respected.TECHNICAL
INFORMATION FOR INSTALLATION PERSONNEL:
This appliance must be installed only by authorised personnel and in accordance with the
regulations of Electricity authorities. The wall and bench surfaces must be capable of sustaining tempera-
tures of 95 degrees Celsius. All laminates, fixing adhesive and surfacing
materials should be certified suitable for this temperature.Do not install it in the unfireresistant
place (like curtain etc). When you operate, the manufacturer has no responsibility.
According to the picture as follows, cut the square hole in bench and place the built-in electric hob in it. Your
hob can be fitted to any worktop with a thickness of 40 to 50 mm.
Inserting and fixing the hob
Before insertinf the hob into the work surface, place the adhesive seal ‘a) arount the underside edge fo the
hob. It is important to fix this gasket evely, without gaps or overlapping to prevent liquids from seeping
inderneath the hob.
1. Remove the pan stands and the burner caps then turn the hob upside down, taking care not to damage
the ignition pligs and the thermocouples.
2. Place the gasket around the bottom edge of the hobs as shown in the illustataion overleaf.
3. Place the hob in the installation opening and push it down so thaht the hob is resting frimly on the
cabinet.
4. Secure the hob in position using the fixing brackets supplied.
a
Worktop
Fixing bracket
Screw
Secure the hob to the underside of the worktop using the fixings provided.Screw one end of
the bracket into the pre-drilled holes in the underside of the hob.The other end of the bracket
should be located underneath the worktop to secure the hob in position.
Note 1 :
Fire resistant material (eg ceramic tiles) is required to 450mm above burner top if wall or vertical structures
are not permitted within 200 mm from burner.
Note 2:
No overhanging surface or rangehood and exhaust system are not permitted within 750 mm
above burner tops.
Note 3:Leave at least 50 mm clearance between the base of the appliance and a combustibile
surface.Never leave the packing components (plastic bags, nails, foamed polystyrene, etc..) within the
reach of the children since they are a source of potential danger.
The hob has a speciaf seal which prevents liquid from entering the cabinet Follow these instructions in
order to correctly apply this
Seal:
Detach the seals from their backing, that the transparent protection still adheres to the seal
itself. Turn over the hob and correctly position seal under the edge of the hob itself, so that
the outer part of the seal itself perfectly matches the outer edge of the hob. Evenly and
securely fix the seal to the hob, pressing it firmly in place.
CLEANING AND MAINTENANCE
-Do not use cleaning products containing abrasive materials for the cleaning and maintenance of the glass
front panel.
-When cleaning do not use cleaning agents with a strong abbrasive effect,such as e.g. scouring powders
containing an abrasive,abrasive compounds,abrasive stones,pumice stones,wire brushes and so on.They
may scratch the hob surface, causing irreversible
damage.
-Large spillages that are firmly stuck to the hob can be removed by a special scraper; but be
careful not to damage the ceramic hob frame when doing this.
Caution!
The sharp blade should always be protected by adjusting the cover(just push it with you thumb). Injuries
are possible so be careful when using this instrument-keep out of reach of
children.
Appropriate light cleaning or washing products are recommended,such as e.g. any kind of liquids
emulsions for fat removal. Alternatively a solution of warm water with a little washing up
liquid or cleaning products for stainless steel sinks can be used.
MALFUNCTION ELIMINATION
Malfunction
Hob doesn't work
Eliminating guide
•Check the connection of wires
•Check the fuse and the current limit
There is some smoke
when it is working
•It is normal the first time you use.
•Clean the drail around the electric hob
and the heating area.
The wire is damaged
•Connect the nearest maintainance
center to change the equipment parts.
Symbol Value Unit
Model identification
Type of hob
Number of electric cooking
zones and/or areas
Heating technology (induction
cooking zones and cooking
areas, radiant cooking zones,
solid plates)
For circular cooking zones or
area: diameter of useful surface
area per electric heated cooking
zone, rounded to the nearest 5 mm
For non-circular cooking zones or
areas: length and width of useful
surface area per electric heated
cooking zone or area, rounded to
the nearest 5 mm
Energy consumption per cooking
zone or area calculated per kg
Energy consumption for the
hob calculated per kg
Ø
L, W
--
--
--
--
EC
electric cooking
EC
electric hob
Built-in hob
4
Big ring: 18,0 cm
N/A
Small ring: 14.5 cm
Big ring: 193,78
Multiple zone: 194.29
Small ring: 186,66
cm
cm
Wh/kg
Wh/kg
Radiant cooking
zones
190.35
HCE604TB2
TERMINAL BOARD
Multiple zones:
outer ring: 18,0 cm,
inner ring: 12,0 cm
Recommended
type of
connection lead
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the E terminal.
For 220-240V earthed one-phase connection, bridges
connect L terminals and terminals, safety wire to
E
N
L
①
②
④
⑤
①
②
④
⑤