Summit ALFZ53 24" Wide Built-In All-Freezer, ADA Compliant

User Manual - Page 12

For ALFZ53.

PDF File Manual, 40 pages, Read Online | Download pdf file

ALFZ53 photo
Loading ...
Loading ...
Loading ...
12
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 44º and
90ºF (7º to 32ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions
may cause interior temperatures to fluctuate. The operating temperature range may not be reached.
CONTROL PANEL for REFRIGERATORS
ON/OFF Power
To turn the appliance OFF, press the symbol and hold for 5 seconds.
To turn the appliance ON, press the symbol and hold for 1 seconds.
LIGHT
To turn the interior light on/off, press and hold the key for 5 seconds. The interior light indicator
will light up or go out to confirm the selection. The interior light indicator is the dot at the bottom
right of the display.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Setting the Temperature Control
You can set the temperature by touching the UP and DOWN symbols. When you push either of
the two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F, or 3°C.)
The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
The range of the temperature control is from 36°F to 43°F.
To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
Interior Light
The interior light makes it easy to view your items. Pressing and holding the LIGHT symbol for 5
seconds toggles between 2 modes of operation for the internal lights: functional (default) mode
and showcase mode. If you are in functional (default) mode, the lights will turn on only when the
door is open. If you are in showcase mode, the lights will be on whether or not the door is open.
Loading ...
Loading ...
Loading ...