Loading ...
Loading ...
Loading ...
4
ABOUT YOUR WATER HEATER
WATER HEATER APPLICATION
This water heater is designed for use in a single family domestic dwelling for the
purpose of heating potable water. Its use in an application other than this may
shorten its life.
MODEL TYPE
The Rheem
®
water heater you have chosen will be either a Rheemglas
®
or
RheemPlus™ model.
Rheemglas models are available with either a single heating unit or with twin
heating units and the RheemPlus models are available with a single heating unit
only (refer to “Single Element Model” on page 7 and “Twin Element Model” on
page 7). A water heater with a supply cord and plug is suitable for indoor
installation only. All other water heaters can be installed indoor or outdoor.
Water is stored in a vitreous enamel lined steel cylinder and heated by the
electric immersion heating unit. The thermostat controls the temperature.
Automatic safety controls are fitted to the water heater to provide safe and
efficient operation.
Depending on the model of water heater, it may have caps or brass plugs on one
side of the tank. The plugs and caps block off alternative connection points and
are not to be tampered with or removed.
HOW HOT SHOULD THE WATER BE?
The water heater features an adjustable
thermostat, which allows you to choose
the most suitable temperature for your
hot water needs. Refer to “Temperature
Adjustment” on page 5.
A RheemPlus water heater is
temperature limited to deliver water not
exceeding 50°C.
To meet the requirements of the
National Plumbing Standard the
temperature of the stored water must
not be below 60°C.
maximum thermostat setting
050 models
minimum thermostat setting
and minimum recommended
stored water temperature.
top heating unit thermostat
setting on a twin element
model (not adjustable)
maximum thermostat setting
Rheemglas and RheemPlus
(025, 080 to 315 models)
RheemPlus maximum delivery
temperature.
maximum recommended
supply temperature to
bathrooms and ensuites
Loading ...
Loading ...
Loading ...