Loading ...
Loading ...
Loading ...
English – 10
To activate walk assistance, one of the following ac-
tions must occur within the next 10s:
– Push the eBike forwards.
– Push the eBike backwards.
– Perform a sideways tilting movement with the
eBike.
After activation, the motor begins to push and the
continuously filling white bars change color to ice-
blue.
If you release the (8)button, walk assistance is
paused. You can reactivate walk assistance within
10s by pressing the (8)button.
If you do not reactivate walk assistance within 10s,
walk assistance automatically switches off.
Walk assistance is always ended if:
– the rear wheel jams;
– the bicycle cannot move over ridges;
– a body part is blocking the bike crank;
– an obstacle continues to turn the crank;
– you start pedaling;
– the (9)button or on/off button(1) is pressed.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
ABS – Anti-lock braking system (optional)
If the bicycle is equipped with a Bosch eBike ABS, the
ABS LED(4) lights up when the eBike system starts.
If the eBike reaches a speed of3.7mph, the ABS
LED(4) goes out.
In the event of a fault, the ABS LED(4) lights up to-
gether with the orange flashing assistance level
LED(5). You can acknowledge the error with the se-
lect button(2); the flashing assistance level LED(5)
goes out. The ABS LED(4) continues to light up to
show that the ABS system is not in operation.
For details on the ABS and how it works, please refer
to the ABS operating instructions.
Establishing a smartphone connection
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flow application
is required.
Connection to the app occurs via a Bluetooth® con-
nection.
Switch on the eBike system and do not start riding
the eBike.
Begin Bluetooth® pairing by long pressing (>3s) the
on/off button(1). Release the on/off button(1) as
soon as the topmost bar on the battery charge indica-
tor shows the pairing process by flashing blue.
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flowapp.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
Lock function
The lock function can be set up and configured via the
eBike Flowapp. This stores a digital key on the
smartphone, which is required to start the eBike sys-
tem.
Once the lock function is switched on, the eBike can
only be put into operation if:
– the configured smartphone is switched on;
– the smartphone has sufficient battery charge;
– and the smartphone is in the immediate vicinity of
the control unit.
Otherwise, motor support remains switched off.
If the key is not verified immediately, the search for
the key is shown by the battery charge indicator(3)
and the assistance level LED (5) flashing white. If the
key is found, after flashing white the state of charge
of the battery and the last set assistance level is dis-
played.
0 275 U07 3RL | (21.05.2021) Bosch eBike Systems
Loading ...
Loading ...
Loading ...