Loading ...
Loading ...
Loading ...
Before Setting Oven Controls
OVEN VENT
Fig. 1
Oven with visible
Bake Element- Fig. 2
Oven Vent Location
The oven vent is located under the left side of the control panel (See Fig.
1). When the oven is on, warm air passes through the vent. This venting is
necessary for proper air circulation in the oven and good baking results. DO
NOT BLOCK OVEN VENT.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out.
To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack
upward and slide the rack back into place.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL
(PRIOR TO OPERATING THE OVEN). Always use oven mitts when
using the oven.
For models with a visible Bake Element (Refer to Fig. 2)
For models with a hidden Bake Element* (Refer to Fig. 3)
Recommended Rack Positions for Broiling, Baking & Roasting:
Food Rack Position Rack Position*
Broiling hamburgers & steaks 1 1
Broiling meats, chicken or fish 1,2 or 3 1,2, or 3
Cookies, cakes, pies, biscuits 3 or 4 3 or 4
& Muffins
Frozen pies, angel food cake, 5 or 6 6
yeast, bread, casseroles, small
cuts of meat or poultry
Turkey, roast or ham 6 7
Oven with hidden
Bake Element - Fig. 3*
Types of Oven Racks
FlatOven Rack
Fig.4
l__ Always use pot holders or oven
mitts when adjusting the oven racks. Wait until
the oven has completely cooled if possible. Oven
racks may be HOT and may cause burns.
Your range may be equipped with one or more of
the oven rack types shown; Flat Rack (Fig. 4),
Flat Half Rack (Fig. 5) and Offset Rack (Fig. 6).
To maximize cooking space the Offset Rack can
be used in the lowest rack position to roast large
cuts of meat and poultry.
Flat Half Rack
Fig. 5
Fig. 7
Offset Oven Rack
Fig. 6
Fig. 8
The Flat Half Rack has a removable insert that can provide extra space for larger food items. The right half rack portion
may still be used for other food items like a casserole dish (See Fig. 5). To remove the insert, squeeze on the left front
insert side (See Fig. 7) of the rack and tilt out clockwise. To reinstall insert rear hooks at back of insert (See 1-Fig. 8) and
lay insert down. Make sure both insert front hooks snap into rack (See 2-Fig. 8).
Do not use cookware that extends beyond the edge of the Flat Half Rack. For best results, allow 2 inches between the pan
placed on the rack and oven side or rear walls.
7
Loading ...
Loading ...
Loading ...