Loading ...
Loading ...
Loading ...
TRIMMER
Alwaysobservesafetyruleswhen
performinganymaintenance.
"nRES
Keeptiresfreeofgasoline,oil,or
insectcontrolchemicalswhichcan
harmrubber.
Avoidstumps,stones,deeprots,
sharp objects and other hazards that
may cause tire damage.
TR]MMERUNE
For best results, replace trimmer lines
when they have worn to half their original
length. Use .155 inch diameter trimmer
line. Cut new tdmmer line length to 18-314
inches. After new lineis installed on
trimmer head, check all lines so they do
notvary more then one (1) inch in length.
Thisis important tomake sure the tdmmer
head is balanced and will not vibrate
abnormally.
• iLWARNING: Use only the specified
trimmer line. Do not use other materials
such as wire, stdng, rope, etc. Wire can
break off duringtrimming and become a
dangerous missile that can cause sedous
injury.
TO REPLACE TRIMMER LINE
1. Disconnect spark plug wire from spark
plugand place wire where it cannot
come in contactwith spark plug.
2. Remove worn trimmer line from line
carder plate.
3. Fold new, cut to length, trimmer line in
half and insert folded end through
carder plate opening to back side of
retainer clip.
4. With folded end of line at back side of
retainer clip, pull line outward until
line is fully seated under the retainer
clip.
5. Repeat on other side of carder plate.
6. Check all lines to be sure they are the
same length.
7. Reconnect spark plug wire to spark
plug.
Trimmer line
Carder plate
opening
Retainer dip
ENGINE
LUBRICATION
Use only high quality detergent oil rated
with API service classificationSF-SJ.
Select the oil's SAE viscosity grade
according to your expected operating
temperature.
SAlE VISCOSITY GRADES
NOTE: Although multi-viscosity oils
(5W30, 10W30 etc.) improve startingin
cold weather, these multi-viscosity oils
will result in increased oil consumption
when used above 32°F. Check your
engine oil level more frequently to avoid
possible engine damage from running
low on oil.
Change the oil after every 25 hours of
operationor at least once a year ifthe
unitis not used for 25 hours in one year.
Check the crankcase oil level before
starting the engine and after each five (5)
hours of continuous use. Tighten oil plug
securely each time you check the oil
10 leVel.
Loading ...
Loading ...
Loading ...