Loading ...
Loading ...
Loading ...
About the dishwasher control panel.
_l_ Enhancements
ADDED HEAT
{EXTRA HOT WASH)
Thelight above the selected pad will be ONto indicate which ENHANCEMENThasbeenselected.
DELAYHOURS Youcan delay the start of a wash cycle for up to 24 hours (dependingon model).Press
the DELAYSTARTpad to choosethe number of hours you want to delay the start of
the cycle; then pressSTART/RESET.
PDW8000 Series:Themachine will count down and start automatically at the
correct time.
CDW9000 Seriesand PDW9000 Series:After closing the door,the machine will count
down and automatically start at the correct time.
NOTE:Tocancel the DELAYSTARTselection beforethe cycle begins, repeatedly press
the DELAYSTARTpad until the display isblank.
When selected,the cycle will run longer with heating element on to improve both wash
and dry performance.
NOTE:Cannot be selectedwith RINSEONLYcycle.
PREWASH Forusewith heavily soiledand/or dried-on, baked-on soils.Thisoption MUSTbe
(on some models) selectedPRIORto starting the cycle. Thisoption adds !5 minutes to the cycle time.
NOTE:Cannot be selectedwith RINSEONLYcycle.
HEATEDDRY Shuts offthe drying heat option.Disheswill air dry naturally (PDW8900Series)or
Light Off fan dry (PDW9200-PDW9900Seriesand CDW9000Series)to save energy.
HEATEDDRY Turnsthe heater onfor fast drying. Thiswill extend the total cycle time by iS minutes
LightOn for the ANTI-BACTERIALcycle,38 minutesfor the NORMAL,SINGLERACKWASH
and COOt(WAREcycles,8 minutes for the SPEEDcycle, !5 minutes for the
PLASTICScycle and 30 minutesfor all othercycles.
NOTE:Cannot be selectedwith RINSEONLYcycle.
LOCK Youcan lock the controls to prevent any selections from being made. Or you can lock
_1 the controls after you have started a cycle.
Children cannot accidentallg start dishwasher bg touching pads with this option
selected.
Tounlock the dishwasher controls, pressand hold the HEATEDDRYpad for 3 seconds.
Thelight above the lock pad will turn off.To lock the dishwasher,pressand hold the
HEATEDDRYpad for 3 seconds.The light above the LOCKpad will turn on.
RESETTochange a cycle after washing starts...
PDW8000Series:Touchthe START/RESETpad to cancelthe cycle.TheSTART/RESETlight
will flash while the water ispumped out if needed.This takes approximately 2 minutes.
PDW9000 Series:Openthe door slowly to prevent splash-out. Touchthe START/RESET
pad to cancel the cycle. If the START/RESETlight isflashing, closethe door untilthe
water pumps out (thistakes approximately 2 minutes)and the light stopsflashing.
When the light stopsflashing,the dishwashercan be reprogrammed and restarted.
_ Start
PDW8000 Series
Closeand latch the dishwasher door and selectthe cycle and desiredenhancements.Touchthe
START/RESETpadto beginthe cycle.Water fill beginsimmediately, and approximately 80 secondslater
the wash action begins.
When the dishwasher door isfully closed and latched,the control panel lights will display the last settings
you selected.If you don't want to change any of the settings,simply touch the START/RESETpad to
begin the cycle.
If the door isclose&the indicator lightswill turn off ifthe START/RESETpad isnot selectedwithin 5 minutes.
Toactivate the display,open and closethe door or pressany pad.
Loading ...
Loading ...
Loading ...