Loading ...
Loading ...
Loading ...
FITTING UNIT
4, Secure with plastic tie as shown below.1. Fix Flue Adapter to Flue
Manifold with PIPE STOPPER S
as shown below.
Inletelbow
Inlet hose
When servicing unit replace plastic tie with new
one.
(Available at local hardware store or contact
local distrilbutor.)
2. Fit Wall bracket as shown below.
5. Connect Vent Sliding Tube with
PIPE STOPPER S and E as shown below.
Flue Manifold
Screw Sliding Tube
PIPE STOPPER S
3. Fit Air inlet Hose to heater. Fix Side
Back Spacers with screws.
PIPE STOPPER E
Pipe "A"* Swivels for location adjustment
Pipe "B"- Telescopic-telescopes into pipe A and flue manifold
Pipe "C" - Fits on manifold =Air Intake" pipe
Air Inlet Hose
Connect Air Inlet Hose to Manifold
Inlet.
Do not kink the hose.
Sliding Tube should not be extended beyond
the RED LINE.
Red line should not be visible after sliding the
tube back intothe vent outlet.
-21 -
Loading ...
Loading ...
Loading ...