Loading ...
Loading ...
Loading ...
4
3. Startup and shutdown operation
(1) Start up: short press the power button, the indicator light is on, and the machine is in
standby mode.
(2) Shutdown: press and hold the power button for more than 2 seconds, and the indicator
light will be off and the machine shut off.
The LED indicator lamp status warning
BMS Over current or short circuit
protection
Turn off after the indicator light flashes
BMS Startup timeout
The indicator light flashes and not shut down
Normal startup
The indicator light on
Normal shutdown
The indicator light off
(3) DC power switch and AC power switch are integrated in the interaction LCD
screen(Figure 1),press“DC ON/OFF”button and “AC ON/OFF”button on the screen to turn
on/off the DC /AC output.
4. How to use the touch screen
Interaction LCD screen(Information Vision) supports below functions:
(1) Real time display of voltage, current, power, temperature and state of charge and
discharge.
(2) The user can adjust the output voltage, frequency, charging mode, power consumption
mode and time information according to the setting column.
(3) Support energy-saving, and enable Super ECO mode to save more than 30% of
useless energy loss.
(4) Support users to view fault information, historical fault information, software version
independently.
5. The operation steps of touch screen
Warm tip: ●The touchable LCD screen is a resistance screen. we recommend to press
the touch button by fingernail lightly until it "beeps".
●In order to maximize the lifespan of the LCD screen, please avoid direct sunlight on it.
(1) When press the power button,it will enter the main interface of the LCD display screen:
Loading ...
Loading ...
Loading ...