Loading ...
Loading ...
Loading ...
Page 7
5. Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify
that the appropriate electrical supply requirements have been met. Please refer
to the table on page 4 for appropriate electrical requirements. The cooktop is
supplied with a 48-inch long conduit for a connection to an accessible junction
box. The conduit consists of three insulated wires. There is a hot lead conductor
(black insulated-tinned copper), one insulated ground conductor (green
insulated-tinned copper) and a neutral conductor (white insulated-tinned copper).
(See Wiring Diagram for CR2115 models below and on bottom of the cooktop.)
Attach conductor wires to residence wiring in accordance with national, state and
local electric codes.
Warning – Grounding
The entire appliance must be grounded at all times
when the electrical power supply is on. Do not
ground the appliance with the neutral house supply
wire (white). A separate ground must be used.
6. Final Preparations Prior to Use
Remove the plastic film from the cooktop. Clean the cooktop before you use it
for the first time. A thorough cleaning with a recommended cooktop cleaner will
provide a clean, shiny coating on the cooktop surface.
The next section of the manual covers cooktop use, maintenance, safety and
service information.
Please keep these instructions with your cooktop for future reference.
!
Wiring Diagram
Loading ...
Loading ...
Loading ...