Loading ...
Loading ...
Loading ...
Toreducetheriskoffire,electricshock,orinjurytopersons,readthe
HMPORTANTSAFETYHNSTRUCTHONSbeforeoperatingthisappliance.
Operation of Current
Device
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indicated
by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
o Always make sure the RESET button is pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. FtMUST be replaced by one obtained from
the product manufacturer.
Using Air Conditioner
NOTE: Hfthe air conditioner is turned off,
wait 3 minutes before restarting. This allows
pressure inside the compressor and
equalize. Failure to follow these instructions
may be harmful to your unit.
To begin operating the air conditioner, follow these steps:
1. Set the thermostat to the highest number (coldest or cooler setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louvers for comfortable air flow (see Air Directional Louvers).
4. Once the room has cooled, adjust the thermostat to the setting you find most comfortable.
Review the "Air Conditioner Features" section for other settings.
Air Conditioner Features
->
I
The conrroh fe_/ured/b_ti7/s m_nua/are repreeenmr/Ye ofrn3ny av3/)_biemodeh. Yourmodel
may offerel_hrlyd/;fferenffeatures
Cool Mode
The desired cool setting is selected by rotating the knob to the right to the appropriate location.
"hi cool" has maximum cooling effect and airflow.
lo cool" has minimum cooling effect and airflow.
Note: Hfyour unit is equipped with a vent handle, keep it closed for maximum efficiency.
Fan Mode
Rotate the knob to the Ieft to select your choice of fan speeds for air circulation.
Note: When selecting a fan speed, the compressor will not run.
Thermostat
The thermostat is used to set the desired room temperature when the unit is being operated
in the "o00g MODE",
Toset the desired room temperature, rotate the thermostat switch to the desired setting, After
the set temperature is achieved the thermostat will automatically start and stop the compressor
in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher cool settings. Higher cool settings will
provide lower room temperature.
Rotate the thermostat selector counter clockwise for lower cool settings. Lower cool settings
will provide higher room temperature.
Loading ...
Loading ...