Loading ...
Loading ...
Loading ...
Slideaflangedbearingontotheaxleandpushitinto
theholeintheendplate.Seefigure5.
Driveaspringpinintotheholeintheaxleuntilthepin
justextendsthroughtheothersideoftheaxle.The
springpinssecuretheaxleintheframeandshould
alsopreventtheaxlefromrotating.Seefigure5.
FLANGED
BEARING
SPRING PIN
/
FIGURE 5
Assemble the hitch mount arms to the outside of the
four hitch arm mount brackets as shown in figure 7.
Use four 5/16" x 1" carriage bolts and four 5/16" nylock
nuts. Do not tighten yet. See figure 7.
(4) 5/16" x 1"
CARRIAGE BOLTS
(4) 5116" NUTS
(NYLOCK)
\
(4) HITCH ARM
MOUNT
BRACKETS
HITCH MOUNT ARMS
FIGURE 7
Attach two hitch arm mount brackets to the middle
holes in the rear frame angle using two 5/16" x 3/4"
hex bolts and two 5/16" nylock nuts. Do not tighten
completely. See figure 6.
Attach two hitch arm mount brackets to the middle
holes in the front frame angle using two 5/16" x 3/4"
hex bolts and two 5/16" nylock nuts. Do not tighten
completely. See figure 6
HITCH ARM
MOUNT BRACKETS
5/16" x 3/4"
HEX BOLT
REAR FRAME _'%
ANGLE
5/16" x 3/4"
HEX BOLT
/
FRONT FRAME
ANGLE
5/16" NUTS
(NYLOCK)
FIGURE 6
Assemble the ends of the hitch mount arms together
using two 5/16" x 1-1/4" hex bolts and two 5/16"
nylock nuts as shown in figure 8. Do not tighten yet.
Assemble the hitch brackets to the hitch mount arms
using two 5/16" x 2" hex bolts and two 5/16" nylock
nuts as shown in figure 8. Do not tighten yet.
HITCH MOUNT ARMS
! _I __.._.-- (2) 5/16" x 2"
HEX BOLTS
(2) 5116" NUTS
_ _ (NYLOCK)
HITCH BRACKETS
/ !
/ ,J _-"- (2) 5116" NUTS
_J (NYLOCK)
"_-'_" (2) 5/16" x 1-1/4" HEX BOLTS
FIGURE 8
Tighten the bolts assembled in figure 6.
Tighten the bolts assembled in figure 7.
Tighten the bolts assembled in figure 8.
Attach the aerator to your tractor using the hitch pin
and the hair cotter pin.
Loading ...
Loading ...
Loading ...