Loading ...
Loading ...
Loading ...
BT705 Battery Analyzer User’s Guide - English Version_V1.00
15
No.
Test Results
Interpretation
1
GOOD BATTERY
The battery is in good condition.
2
GOOD-RECHARGE
The battery is in good condition but low current. Fully charge
the battery and return it to service.
3
CHARGE & RETEST
Fully charge the battery and retest. Failure to fully charge the
battery before testing may result in inaccurate results. If you
still get CHARGE & RETEST message after you fully charge
the battery, replace it.
4
REPLACE BATTERY
The battery is almost dead or the connection between the
battery and battery cable is poor. Replace the battery and
retest; or disconnect the battery cables and retest the battery
using the out-of-vehicle test before replacing it.
5
BAD CELL-REPLACE
The battery may be damaged such as broken cell or short
circuit. Replace the battery and retest.
9. Press the BACK button to return to Main Menu. Or, press the ENTER button for cranking test
if you are processing an in-vehicle test.
NOTE
The tester keeps the results of last test only. When you start a new test, the last results are
overwritten.
3.3 Cranking Test
NOTE
Before starting the test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the
proper tension, will prevent the engine from achieving the rpm levels needed for the test.
After an in-car battery test, the display alternates between the battery test results and the
message PRESS FOR CRANKING TEST.
Loading ...
Loading ...
Loading ...