Loading ...
Loading ...
Loading ...
OWNER'SRESPONSIBILITIES
Followthe hourly or calendar intervals,whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCESCHEDULE
MAINTENANCETASK
Before Each
Use
OPERATINGiNTERVALS
Every 25 Hours Every 50
or Year y HoUrSyearlyOr
Every 100
Hours or
Yearly
PRESSURE WASHER
X_
ChecWclean water inlet screen
Check high pressure hose X
Check detergent hose X
Check spray gun and assembly for leaks X
Purge pump of air and contaminants X
Prepare pump for storage below 32°F See Winter Storage
ENGINE
X
Check oil level
Clean debris X
Change engine oil X2
Service air cleaner X_
Service spark plug X
Service spark arrester X
Clean cooling system X2
Prepare for storage If unit is to remain idle for longer than 30 days.
SERVICEDATES
FILL IN DATESAS YOU COMPLETE
REGULARSERVICE
' Clean if clogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Changesooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions.
General Recommendations
Regular maintenancewill improve the performance and
extendthe life of the pressure washer. Seeany Sears or
other qualified service dealerfor service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receivefull value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will needto be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedulechart above.
NOTE:Oncea year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.
Pump Oil
DO NOTattempt any oil maintenance on this pump. The
pump is pre-lubricated and sealed from the factory, requiring
no additional maintenancefor the life of the pump.
Emissions Control
Maintenance, replacement, or repair of the emissions
control devices and systems may be performedby any non-
road engine repair establishmentor individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer. Seethe
Emissions Warranty.
Before Each Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screen for damage.
4. Checkhigh pressure hose for leaks.
5. Checkcleaning tank for damage.
6. Checkgun and nozzle extension assembly for leaks.
7. Purge pump of air and contaminants.
16
Loading ...
Loading ...
Loading ...