Loading ...
Loading ...
Loading ...
?:::i:22:11
ii_iilUiii{iii{{i_
//iiiiiiiii_!_iiiii/
ML
Abouttheautomaticicemaker.
A newly installed refrigerator may take 12to 24 hours to begin making ice.
Automatic lcemaker
On dispensermodels,
to access ice or reach
the power switch:
o Lift the bin, then pull it
forward until the bin stops.
o ower the bin to access ice
or reach the power switch.
NOTE:/n order to take full advantage
of the tilt-out ice bin, only store items
on the shelf below the ice bin that
are no taller than the lowest point
on the bin.
The icemaker will produce seven cubes
per cycle--approximately 100-130 cubes
in a 24-hour period, depending on fleezer
coIIlpartlnent teIilperat/lie, iOOlil
Wmperamre, nmnber of door openings
and ofl_er use condiuons.
If fl_e refligemtor is operated before fl_e
water connection is made to fl_e icemake_;
set the power swimh in the OFFposifion.
_&,q_enthe refiigemtor has been connecmd
to the wamr supply, set the power switch to
the ON position.
The icemaJ<er will fill wiflt water when it
cools to 15°F (-10°C). A newly installed
refligemtor may rake 12 to 24 ]loui_ to begin
mNdng ice cubes.
You will hear a buzzing sound each dine
the icemaker fills with wamr.
Throw away the first few batches of ice to
allow the water line to clear
Be sure nothing interferes with the sweep
of the re.clef arm.
When file bin fills to file level of file feeler
arm, file icemaker will stop producing
ice. It is normal for several cubes to be
joined together
If ice is not used fiequently, old ice cubes
will become cloudy, tasm stale and shrink.
Special note about dispenser models:
Dispenser models have a tilt-out ice bin.
The bin can be dlmd out as shown in the
illustrations, and it will hold itself up
while you rake ice out or mrn the
icemaker power swimh on and (fie Be
sme to put the bin back in place before
closing the door
To restore your ice level from an empty
bucket stage, the following steps are
recommended:
12 hours after the fixer batch of ice
has fidlen into the bin, dispense
3 to 4 cubes.
After an additional 6 hours, dispense
3 to 4 cubes again°
These steps will restore your ice level
in the shortest amount of time.
Switch
o Lift the bin, then pull it
forward until the bin stops.
Removing ice Bin (dispensermodels)
CAUTION:Theice bin is heavywhen full
Set the power switch to the OFFposition
before removing the bin.
When replacing the bin, be sure to press it
firefly into place. If it does not go all fire
way back, relilove it and romm the drive
mechanism 1/4 turn. Then push the bin
back again.
Drive
Dispenser Models only
o ift and pull forward again
to remove the bin.
14
Loading ...
Loading ...
Loading ...