Loading ...
Loading ...
Loading ...
(356,1)
北米Model "A3230BE-B" EDITED: 2021/ 8/ 18
ate extremely slowly, the system may
detect an error and turn on the brake
system warning light. However, this
does not indicate a malfunction if the
brake system warning light turns off
after operating the switch.
. When the electronic parking brake
has not been used for a long period of
time, the electronic parking brake may
operate automatically after the ignition
switch is turned to the “LOCK”/“OFF”
position. This occurs due to checking
the proper operation of the electronic
parking brake and does not indicate a
malfunction.
. If you cannot release the electronic
parking brake due to the switch mal-
function, refer to the instructions de-
scribed in “Automatic release function
by accelerator pedal” FP354.
After activating the electronic parking
brake, you may hear a short sound
several minutes after the electronic
parking brake indicator light illumi-
nates as the system confirms proper
engagement. This sound is different
from the apply and release sound.
This can occur:
– If the brakes are extremely hot.
– If the car is parked on a steep
incline.
– If the electronic parking brake is
applied after the ignition switch is
turned to the “OFF” position.
This is a normal operating sound under
any of these conditions.
! Automatic release function by ac-
celerator pedal
S07AP0301
The parking brake will be automatically
released by depressing the accelerator
pedal. However, the automatic release
function does not operate under the
following conditions.
. Any door is open.
. The driver’s seatbelt is not fastened.
. The select lever is in the “P” or “N”
position.
If the parking brake is automatically
released, the electronic parking brake
indicator light and the indicator light on
the parking brake switch turn off.
! Auto Vehicle Hold function
S07AP0305
The Auto Vehicle Hold function will auto-
matically keep the vehicle held even after
releasing the brake pedal when the vehicle
is at a complete stop, such as at traffic
signals.
WARNING
. Do not use the Auto Vehicle Hold
function on a steep hill or slip-
pery road. The vehicle may move
even when using the Auto Vehicle
Hold function, causing serious
injury or accidents.
. Do not use the Auto Vehicle Hold
function to park the vehicle. The
vehicle may move unexpectedly,
causing serious injury or acci-
dents. Make sure to shift the
select lever to the “P” position
and apply the electronic parking
brake in the following cases.
– When you are going to park
your vehicle
– When passengers are getting
in or out of the vehicle
– When you are loading or un-
loading
. When using the Auto Vehicle
Hold function, do not release the
brake pedal before the Auto Ve-
hicle Hold operation indicator
illuminates. The vehicle may
move unexpectedly, causing ser-
ious injury or accidents.
. Deactivate the Auto Vehicle Hold
function in the following cases.
Parking your vehicle
354
Loading ...
Loading ...
Loading ...