Loading ...
Loading ...
Loading ...
seconds until flashes. Touch .
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch for 4 seconds
until comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
6.12 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch for 3
seconds. Touch
for 3 seconds. or
comes on. Touch of the timer to
choose one of the following:
•
- the sounds are off
• - the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to you can
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
6.13 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
basis of mode setting and temperature
of the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer
to hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of
the fan.
Automatic modes
Auto-
matic
light
Boiling
1)
Frying
2)
Mode H0 Off Off Off
Mode H1 On Off Off
Mode
H2
3)
On Fan
speed 1
Fan
speed 1
Mode H3 On Off Fan
speed 1
Mode H4 On Fan
speed 1
Fan
speed 1
Mode H5 On Fan
speed 1
Fan
speed 2
Mode H6 On Fan
speed 2
Fan
speed 3
1)
The hob detects the boiling process and acti-
vates fan speed in accordance with automatic
mode.
2)
The hob detects the frying process and acti-
vates fan speed in accordance with automatic
mode.
3)
This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch until you hear a beep and
keep it pressed until you hear the
second beep.
3. Touch
for 3 seconds until or
comes on.
4. Touch until H and a digit (0 - 6)
comes on. H5 is the default setting.
5. Touch
of the Timer to select the
desired mode (H0 - H6). The chosen
mode activates automatically after 10
seconds.
ENGLISH
15
Loading ...
Loading ...
Loading ...